Here are some pictures of the Bingo Airsoftworks Nerf Vulcan Xtreme, dual PolarStar Fusion Engine powered airsoft gun.
It’s a Nerf Vulcan gun custom converted to use dual PolarStar Fusion Engines. It has all the features and function of a single Fusion Engine Nerf Vulcan, just twice as much BB slinging power! The Fusion Engines were slowed to shoot 27 RPS each, for a total of 54 RPS of sustained automatic fire. It can be tuned up to 40 RPS on each engine for a total of 80 RPS, but the single regulator setup couldn’t keep up the air supply. I set it up to use a dual tank air supply and I let Justin Ramsey take it for a test drive on the field while I filmed.
This was just an experimental/demonstration project to test the feasibility and performance of using dual Fusion Engines.It is not recommended that airsoft guns such as these be fielded regularly (it’s no fun to be shot by that many BBs). This will likely be the only time the gun will be field tested.
Filmed at Old Line Tactical Airsoft, Paintball Adventure Park, Taneytown, MD 12/21/2013.
88 RPS Demonstration
-
- Nerf Vulcan Xtreme
-
- Custom end cap to support double barrels
-
- Dual Madbull 6.03 barrels
-
- Shock cord used to hold box mags closed
-
- Single air line split to two Fusion Engines
-
- FCUs mounted outside of gun for ease of access
-
- Flanking box mag, 4000 rnd capacity
-
- Dual Prowin M4 hopup with Maple Leaf bucking
Updated pictures 6/1/2016
-
- 3D printed custom flash hider
-
- Nerf Vulcan with dual box mags
-
- Hopup access
-
- FCU case
-
- FCU cover
-
- Safety Switch
-
- Shock cord is used to hold the cover in place
-
- Box mag connectors
-
- Right side box mag panel screw
-
- Right side box mag mount screws
-
- Right side box mag mount screws
-
- Left side box mag mount ball hook
-
- Box mag feed spring
-
- Box mag bottom supports
-
- Battery hatch locking screw
-
- Battery connectors
-
- Single air rig configuration
-
- Dual air rig configuration
so cool!
how much would it cost me for you to build one and ship it to me
Hello my name is Eddie I’m a NYC firefighter for 15yrs and fell in love with paintball and airsoft. I’m 40 yrs now and I would for you to build a custom Nerf Vulcan gun converted to use dual PolarStar Fusion Engines for my use. I’ll be responsible and as always safety comes first. I’m sure your aware this can’t be built for anyone because this device comes with responsiblty. I’m a gun(real) owner myself and know what it takes to be responsible adult. Thank you
Email sent.
How much will it cost for u to build it and ship it to me I live in georgia
email sent
I have a nerf Vulcan that I am not using and I was wondering how much it would cost for me to ship it to you and then you turn it into a nerf Vulcan extreme??
Hey guys I have my own Vulcan how much would it cost for me to ship to yo and you make it and ship it back I live in Florida
Contact me and I can send you a quote.
Hello my name is Zech and I saw the performance of this gun and was blown away how much would something like this cost I’m 18 and also a United States Marine
email sent.
V2 engines?
It’s using the upper cylinder from PolarStar V2 Fusion Engines. The lower assembly isn’t needed.
could you do this sort of thing with a Nerf N-Strike elite Retalitor? if so how much would it cost… I live in Texas
Unfortunately there isn’t enough room in the Nerf N-Strike elite Retaliator for a box mag mechanism.
Was just wondering how much something like this would cost.
Unfortunately I’m not accepting any new installation/conversion work at this time. I’m currently focusing on my Advanced System 5 gun, gearbox replacement kits and other exciting projects. Sorry.
do u guys still make them?
Unfortunately I’m not generally accepting any new tuning/installation/conversion work at this time. I’m currently focusing on my Advanced System 5 gun, gearbox replacement kits and other exciting projects. Sorry.