Wolverine Airsoft Hydra P90 Drop In Kit Is Now Available

The Wolverine Airsoft Hydra P90 drop in kit is now available. This is an updated kit that replaces the Wolverine SMP P90 kit. It uses the new Hydra P90 engine and the custom 3D printed chassis has been refined to fit even better in the various P90 models. You can purchase the Hydra P90 drop in kit by clicking here.

IMG_3778 IMG_3777 IMG_3779

Here’s a new video showing the installation of the Hydra P90 kit:

Happy Airsofting!

– Rudy

ICS L85/L86 HPA Engine Gearbox Replacement Kit

Bingo Airsoftworks ICS L85/L86 Gearbox Replacement Kit Is Now Available

The Bingo Airsoftworks ICS L85/L86 HPA Engine Gearbox Replacement Kit is now available. The HPA kit allows you to easily upgrade your ICS L85 to use the Wolverine SMP (it will also work with the PolarStar F1 and Wolverine Hydra, when available). The kit includes everything needed to convert your L85. You only need to hook it up to your air rig and tank and you are ready to go.

It’s also possible to purchase the chassis alone and install your current Wolverine SMP HPA Engine.

The L85 Gearbox Replacement kit w/Wolverine SMP is available for $435 USD, free shipping (US) (for International customers, additional shipping will be billed separately)
Click here to purchase

Here’s a video showing how to install the kit:

First Look at Bingo Airsoft Designs LLC Prototype/Concept Airsoft Gun

Bingo Airsoftworks is very excited to present the first look at the Bingo Airsoft Designs LLC Prototype/Concept Airsoft gun.

09-IMG_3412This unique (and currently unnamed) prototype airsoft gun has been in development for the last 18 months was conceived from the ground up as the ultimate airsoft gun. It is designed to be very flexible and customizable, extremely easy to maintain, and have top of the line performance characteristics.

Here’s a partial list of the distinguishing and anticipated features*:

  • Lightweight, under 5 lbs unloaded
  • Tool-less design. Single push button access to hand guard compartment, single button push to separate the upper and lower receivers and access the hopup and barrel, no pins or screws to remove for basic maintenance
  • Uses standard M4 outer barrels
  • Uses standard M4 hopups and standard inner barrels
  • Uses standard V2 gearbox pistol grips (may change to be real-steel grip support instead)
  • Full top rail, with adjustable and removable riser/handle. Integrated side rails and bottom rail
  • Fully ambidextrous
  • Multiple, customizable fire modes (e.g. safe, semi, burst, full auto, or safe, semi, 3 round burst, 5 round burst, etc).
  • Designed to use an M249 gearbox. This means it will work with an AEG M249 gearbox, PolarStar M249 Fusion Engine, Wolverine SMP/Hydra and PolarStar F1 installed in an M249 gearbox shell (custom chassis for the HPA cylinder replacement engines will be available).
  • In case you missed it, yes, it will work as an AEG. The M249 gearbox design is the most robust format, and it also allows for quick change springs.
  • The fire control electronics will be integrated as part of the gun. The integrated FCU will control all the HPA engines as well as AEG M249 gearbox. This means you can get semi auto and burst modes using an AEG.
  • The FCU will also support bluetooth programming via a mobile app.
  • The trigger mechanism will have integrated “speed trigger” adjustability
  • It does not use magazines!
  • The gun has an integrated BB storage that auto feeds BBs when you pull the trigger. No need to carry multiple magazines, no hi-cap magazine winding, no need for push button speed loaders on mid cap mags.
  • The integrated BB storage area has 3500(!) round capacity, with an easy access quick fill port.
  • Production model will be made from high strength nylon polymers

The prototype shown below was completely fabricated using 3D printing. Note the electronics package is not in place on this prototype.

I believe this airsoft gun will bring the airsoft hobby/sport to the next level. It’s not just airsoft, or mil-soft, it’s the future of of airsoft – Futuresoft. 🙂

Pricing and availability have not been officially established at this time, but we are shooting for Q4 2015 availability**.

Subscribe to this website or follow along on my facebook page to track the ongoing developments of this new and exciting airsoft gun.

Happy Airsofting!

– Rudy

* The feature list is preliminary and subject to change
** Likely to change as additional refinements are incorporated or delays due to unforeseen circumstances

Thumpy Covey from Thumpy’s 3D House of Airsoft had a chance to test out the prototype gun, check it out here:

G&G/Army L85 HPA Engine Gearbox Replacement kit

Bingo Airsoftworks G&G/Army L85 Gearbox Replacement Kit

The Bingo Airsoftworks G&G/Army L85 HPA Engine Gearbox Replacement Kit is now available. The L85 HPA kit allows you to easily upgrade your G&G or Army L85 to use either the PolarStar Fusion Engine or the Wolverine SMP (it will also work with the PolarStar F1 and Wolverine Hydra, when available). The kit includes everything needed to convert your L85. You only need to hook it up to your air rig and tank and you are ready to go.

There are two versions of the kit. One version is for the PolarStar Fusion Engine (the V2 upper cylinder), and one version for the Wolverine SMP (Wolverine Hydra and PolarStar F1). Also there are different trigger switch brackets for the G&G L85 and Army L85.

It’s also possible to purchase the chassis and trigger board, so you can install your existing PolarStar or Wolverine HPA Engine.

The L85 Gearbox Replacement kit is available for $450 USD, free shipping (US) (for International customers, additional shipping will be billed separately)

Click here to purchase the kit.

Here’s a video showing how to install the kit:


Please contact me if you have any questions.

I also have an Ares L85 HPA Engine replacement kit available. Contact me for more details.

Version 2 Wolverine Airsoft SMP mini circuit board kit is now available

Version 2 Wolverine Airsoft SMP mini circuit board kit is now available. This mini circuit board kit is designed to work with the newer wire harnesses that are now used with the SMP. If you are installing the SMP into a gearbox that doesn’t use a standard V2 or V3 trigger board, the mini circuit board kit makes it easier to hookup the trigger switch to the wire harness and add a full auto microswitch. This alleviates the need to cut the wire harness so it can be replaced in the future if necessary. For more details, click here.

IMG_3372

Wolverine Airsoft SMP HPA Engine pre-order available

Wolverine Airsoft SMPI am now accepting pre-orders for the Wolverine Airsoft SMP HPA engine. The SMP is a high performance HPA system that uses one moving part, one solenoid valve, and can be dropped into virtually any airsoft gun platform on the market. Checkout www.wolverineairsoft.com for more details.
The Wolverine Airsoft SMP sells for $390 (free shipping US). You can pre-order a V2 or V3 SMP for a deposit of $100 (only a limited number of pre-order units are available). It is anticipated that the SMP will be available in early July.
Contact Me if you would like to pre-order a Wolverine Airsoft SMP engine.

PolarStar Fusion Engine FCU Firmware Upgrade Service

FCU with re22 FirmwareI’m now offering a service to upgrade your rev2 FCU firmware to the latest revision (re22). The new FCU firmware adds anti-stiction mode with automatic varying poppet dwell. This feature will automatically add a few extra ms to the poppet dwell if the gun has been idle for a period of time to help eliminate “dead-shots”, where the poppet fails to open on the initial trigger pull due to o-ring static cohesion.

I charge $18 to upgrade your FCU firmware to the latest version re22 (covers return shipping for US locations, international is +$8). The upgrade includes removing the existing heat shrink, uploading new firmware, and reapplying new heat shrink covering. Note that updating the firmware will also reset the FCU shot counter to zero. Only available for rev2 FCUs (gen2 and gen3 V2; V3; M249 and M240B Fusion Engines).

You would send out your FCU, and it will be sent back within 2 business days. I guarantee that your FCU will will be sent back in good working order, and you will not have to worry about your FCU being damaged or “bricked” due to the firmware upgrade.